| 1.
What
is NANO1000?
2. What Does NANO1000 Do?
3. Is NANO1000 a Coating or Topcoat?
4. How Does NANO1000 Prevent Damage?
5. What Does NANO1000 Protect Against?
6. How Will NANO1000 Help Me Maintain
Clean Surfaces?
7. Will NANO1000 Change the Qualities
of the Treated Surface?
8. How is NANO1000 Applied?
9. Is NANO1000 Safe for the Environment,
and "Green"?
10. Do I Have to Re-apply NANO1000
After Each Cleaning?
11. How Much NANO1000 Do I Need?
12. Who Can Use NANO1000?
13. Where is NANO1000 Being Used?
14. What is Nanotechnology?
15. How is NANO1000 Sold?
1.
NANO1000 is an invisible, environmentally
green nanotechnology treatment for porous materials that resists stains
and water damage. It is a surface treatment stabilizer, a liquid, water-based,
organic treatment that is applied to porous surfaces – stone, concrete,
tile, brick, pavers and grout - to repel water, oils, and other stains,
indoors and outdoors. NANO1000 is unlike any other product on the market
because it does not peel, and has 100% UV protection.
2.
NANO1000 minutely penetrates the porous material
100% below the surface. Once cured it stabilizes the surface and protects
against damage, including damage caused by freezing and thawing, mold
and mildew, and any organic or non-organic stains. NANO1000 protects the
surface while maintaining its integrity with a transparent application.
3.
NANO1000 is unique from other products
because it is a treatment with surface-changing properties, not a topcoat
or coating. It molecularly bonds to the surface and does not
alter the exterior appearance.
4.
NANO1000 uses nanotechnology – which
uses tiny molecules to bond to the surface to which it is applied.
After curing, the surface is sealed and protected for up to a decade from
various stains, gum, and graffiti as well as weathering and wear. The
size of the nanometer, one billionth of a meter, allows it to penetrate
into the larger web of porous surfaces.
5.
NANO1000 protects against damage from
water (water stains, mold and mildew), foods and drinks (coffee, wine,
soft drinks), autos (motor oil, antifreeze, transmission fluids), chewing
gum, graffiti, and many other materials that stain porous surfaces.
6.
NANO1000 becomes an effective barrier
that does not allow water and other products to penetrate the applied
surface. Water often contains dirt and impurities and this barrier keeps
the treated surface clean. After application, if a damaging product is
on the surface, it can be easily wiped away with water, a household cleaner
or acetone for tougher stains. Efflorescence on stone and concrete surfaces
is also prevented.
7.
It will not. NANO1000 molecularly bonds
to the treated surface and cannot be seen. It does not alter the basic
characteristics of the surface.
8.
The surface needs to be clean
and dry. NANO1000 can then be applied with a hand sprayer, a high quality
short nap roller or brush. It dries to touch within an hour. See Application
Instructions for more information.
9.
Yes. NANO1000 is an organic
treatment that locks on to the surface and holds on until it "dies," approximately
10 years later. It then "lets go" of the surface and because it is organic,
is biodegradable as well. No fear of it building up in our environment
as many other silicon sealers have been known to do. In addition, it has
zero Volatile Organic Compounds (VOCs) which are organic compounds that
participate in a photoreaction, and are considered to be air pollutants.
Some of the sources of VOCs are found in many indoor items such as paints,
wood finishes, carpet, furnishings, and varnishes and chemicals used for
sealing and finishing walls.
10.
No. Because NANO1000 molecularly bonds
to the surface it will withstand numerous cleanings and everyday
wear. The warranty is for five years and one application is effective
for up to 10 years. Areas which do not show water resistance can have
NANO1000 re-applied with no noticeable difference in the surface.
11.
The amount of NANO1000 needed
depends on the surface (stone, concrete or tile) to which it is applied.
On average, NANO1000 will cover about 300 – 600 square feet per gallon.
Approximate coverage for various surfaces is found on the product label.
12.
NANO1000 can be used by homebuilders,
remodelers, homeowners, business owners, contractors, hotels, city govenments,
paving companies, stone manufacturers, and anyone else who wants to protect
their investment from water and stain damage, graffiti, gum, motor oil,
transmission fluids and virtually all stains, as well as weathering and
wear.
13.
NANO1000 can be found on home
foundations, pool decks and patios, sidewalks, roads, public buildings
and on multi-million dollar historical restoration projects in England.
14.
Nanotechnology is the manipulation of
materials on an atomic or molecular scale, with a nanometer being one
billionth of a meter. It is a field of applied science covering a broad
range of topics. The main unifying theme is the control of matter on a
scale smaller than 1 micrometre, as well as the fabrication of devices
on this same length scale. A new generation of analytical tools allows
the deliberate manipulation of nanostructures, and in turn lead to the
observation of novel phenomena. Nanotechnology cuts across many disciplines,
including chemistry, applied physics and materials science. Much speculation
exists as to what new science and technology might result from these lines
of research.
15.
NANO1000 is sold in one gallon
and five gallon increments through UVsealer.com and UrbanElementsConcrete.com.
|